There is no doubt that when you want to change tile grout color, you have to work very hard for this project of home improvement but the end result is highly fulfilling. For those who do not mind using household cleaners to get cleaning jobs done there are basic bathroom cleaners that can easily remove grout from in between the tiles. This method will prevent you from using harsh chemicals to remove the stains. Hydrogen Peroxide and Water – Only use this on method on white grout since it can discolor colored grouts and be sure to test a small, hidden area first. Use a spray bottle with warm water to rinse off the paste and repeat the process if necessary. Apply to grout lines and let it sit for 15 minutes, then rinse with warm water. Let the grout dry completely. Spread generous amounts of the paste and let it sit for at least 10 minutes.
Wipe or spray it on the affected area and lets sit for a few minutes. Sprinkle some water on the tiles and wait for a few minutes. Grouting tile floors is a very common and an essential process without which the tiles won’t remain fixed. You’ll also keep the accumulation of dirt to a manageable level and make the mopping process go much quicker. Of course, you’ll want to keep a mop bucket and mop handy for this project. After you finish sweeping, you’ll want to address any lingering stains before mopping. Not exactly 50/50, but you’ll want to play with your formula until you end up with a thick and malleable paste. You will want to use your grout sealer at least in between every 2-3 moppings. Depending on the state of your floors, you’ll want to pass the mop through again to soak up the dirt and grime.
Finally, pass a clean and dry mop over your floor to fully remove the soap and water. This is a good option if none of the other methods listed here work to remove the stains from your grout or if you have a large area of grout to clean. In severe cases the condition of the grout is so bad that the only option is to remove the existing grout from the tiles and grout them again. Then take a scouring pad which is suitable for plastic surface and clean the tiles with it. Unless frequently cleaned, the tile surface can become coated in a fine layer of soap-scum over time. A typical scrub brush with stiff bristles does a great job and removing grout stains but stay away from softer spongier materials that may just slide over the surface. In some instances, the grout may even be permanently stained to the point where even the best cleaning is not effective. But whatever you use, be sure to wear rubber gloves and always scrub the cleaning solution away from your eyes. Leave the vinegar and water solution to work and then return in a few minutes, or longer if the grout is badly stained.
Add up one 1/2 cup of white vinegar and 1 1/2 hand dishwashing detergent elements into a sprayer container and then swirl to blend. One of the best things to do is apply a coat or two of grout sealer. When you’re done cleaning, keep it cleaner, longer, by applying a couple coats of grout sealer. Keep the newly painted grout untouched for the next 24 hours so that it dries up thoroughly. Use these grout cleaning tips to get your floor to look its best, and remember to take care to keep it clean. Mix mild detergent with water and use a scrub brush on the grouted areas. Grout sealers will protect the areas between your tiles from soaking up the dirty water from your mop and will also help from random spills soaking into your grout. The roller type applicator will store more sealer and it will apply more sealer quickly and is best for floor tiles in large areas with sanded grout. Check the back of the chemical bathroom cleaner labels to make sure that it is safe to use on porcelain tiles or whatever type of tile is in your bathroom. Bleach and Ammonia create the same type of Chlorine Gas that was used as a chemical weapon in WW2!